N74713 Robinson Helicopter Company R44 II accident

NTSB ANC14CA042 · 2014-06-18 · Coldfoot, AK

Docket — crew, injuries and powerplant

Summary

The commercial helicopter pilot reported that the purpose of the flight was to transport two technicians to a remote site in an area of mountainous terrain. The pilot fueled the helicopter and flew approximately 30 minutes to a staging area. After loading the two passengers and their gear, he flew to the planned landing zone (LZ), in a narrow box-valley at about 2,550 feet MSL. The proposed LZ was evaluated while performing an out-of-ground-effect hover, but the pilot determined the LZ was unsuitable. A second LZ was evaluated using the same process and also found unsuitable. While hovering out of ground effect, above a third potential LZ, the helicopter began to descend and the pilot added collective pitch to stop the descent. He said the low rotor annunciator horn then sounded and the helicopter continued to descend. In an attempt to avoid landing in an area of uneven terrain, the pilot said he opted to turn the helicopter to the right and downslope, while trying to override the engine governor to attain additional engine power. The helicopter's skids subsequently struck an area of uneven, down sloping terrain. During touchdown, the helicopter nosed down, pivoted to the left, and rolled onto its left side. The helicopter sustained substantial damage to the fuselage, tail boom and main rotor drive system. The pilot reported no preaccident mechanical anomalies with the helicopter that would have precluded normal operation. The pilot characterized the down sloping wind conditions as light and variable.

Full narrative

The commercial helicopter pilot reported that the purpose of the flight was to transport two technicians to a remote site in an area of mountainous terrain. The pilot fueled the helicopter and flew approximately 30 minutes to a staging area. After loading the two passengers and their gear, he flew to the planned landing zone (LZ), in a narrow box-valley at about 2,550 feet MSL. The proposed LZ was evaluated while performing an out-of-ground-effect hover, but the pilot determined the LZ was unsuitable. A second LZ was evaluated using the same process and also found unsuitable.

While hovering out of ground effect, above a third potential LZ, the helicopter began to descend and the pilot added collective pitch to stop the descent. He said the low rotor annunciator horn then sounded and the helicopter continued to descend. In an attempt to avoid landing in an area of uneven terrain, the pilot said he opted to turn the helicopter to the right and downslope, while trying to override the engine governor to attain additional engine power. The helicopter's skids subsequently struck an area of uneven, down sloping terrain. During touchdown, the helicopter nosed down, pivoted to the left, and rolled onto its left side. The helicopter sustained substantial damage to the fuselage, tail boom and main rotor drive system. The pilot reported no preaccident mechanical anomalies with the helicopter that would have precluded normal operation.

The pilot characterized the down sloping wind conditions as light and variable.

Probable cause

The pilot's failure to maintain adequate main rotor rpm while maneuvering at a low altitude, which resulted in an emergency landing on uneven terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
13000
Visibility (sm)
10
Wind direction
30
Wind speed (kt)
3
Temperature (F)
57
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N74713 ROBINSON HELICOPTER COMPANY R44 II SUBS 135

Sequence of events

#OccurrencePhase
1 Maneuvering-hover Settling with power/vortex ring state defining Climb
2 Emergency descent Collision with terr/obj (non-CFIT) Descent

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Prop/rotor parameters-Not attained/maintained cause
Environmental issues-Physical environment-Terrain-Sloped/uneven-Contributed to outcome factor