N170CC accident

NTSB CEN14CA343 · 2014-07-04 · Tomball, TX · near DWH

Docket — crew, injuries and powerplant

Summary

The pilot reported that he was conducting practice takeoffs and full-stop landings with the airplane owner in the right seat for the purposes of achieving tailwheel airplane currency. The airplane insurance company required pilots to be checked out by the airplane owner before naming them on the policy. The airplane owner was not a flight instructor. The pilot stated that on the second landing, the airplane touched down on the runway centerline and on all three wheels simultaneously. As the airplane slowed, it began to veer to the left. The pilot responded with right rudder input. The airplane subsequently veered to the right "more assertively" than he had intended. Rather than risk striking a runway light while attempting to keep the airplane on the runway, he elected to enter what appeared to be an open grass area adjacent to the runway pavement. However, about 25 feet into the grass, the airplane encountered "marshy area" with standing water and soft mud, causing it to nose over. The airplane sustained substantial damage to the vertical stabilizer and fuselage. The pilot stated that there were no failures or malfunctions associated with the airplane before the accident. He commented that he had received a tailwheel airplane endorsement about 3 years before the accident, with limited tailwheel airplane time accumulated since then. He added that the airplane owner suggested that he be more "assertive with the rudders" after the pilot's initial landing during the accident flight.

Full narrative

The pilot reported that he was conducting practice takeoffs and full-stop landings with the airplane owner in the right seat for the purposes of achieving tailwheel airplane currency. The airplane insurance company required pilots to be checked out by the airplane owner before naming them on the policy. The airplane owner was not a flight instructor. The pilot stated that on the second landing, the airplane touched down on the runway centerline and on all three wheels simultaneously. As the airplane slowed, it began to veer to the left. The pilot responded with right rudder input. The airplane subsequently veered to the right "more assertively" than he had intended. Rather than risk striking a runway light while attempting to keep the airplane on the runway, he elected to enter what appeared to be an open grass area adjacent to the runway pavement. However, about 25 feet into the grass, the airplane encountered "marshy area" with standing water and soft mud, causing it to nose over. The airplane sustained substantial damage to the vertical stabilizer and fuselage. The pilot stated that there were no failures or malfunctions associated with the airplane before the accident. He commented that he had received a tailwheel airplane endorsement about 3 years before the accident, with limited tailwheel airplane time accumulated since then. He added that the airplane owner suggested that he be more "assertive with the rudders" after the pilot's initial landing during the accident flight.

Probable cause

The pilot's loss of directional control during landing rollout, which resulted in a runway excursion and the tailwheel airplane nosing over. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
80
Wind speed (kt)
5
Temperature (F)
90
Nearest airport
David Wayne Hooks Memorial
Distance from field
1.0
Airport elevation
152

Aircraft

RegistrationMakeModelDamageFAR part
N170CC — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Loss of control on ground defining Cruise
2 Landing-landing roll Runway excursion Cruise
3 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause