N8343P Robinson Helicopter R44 accident
NTSB CEN14CA426 · 2014-08-13 · Lancaster, WI · near 73C
Docket — crew, injuries and powerplant
Summary
The pilot reported that while conduction an aerial application flight, he did not see power lines in his path and the helicopter struck the wires that and then the ground. The main rotor blades severed the tail boom of the helicopter during the event. In his report, the pilot listed no mechanical malfunctions or failures of the helicopter.
Full narrative
The pilot reported that while conduction an aerial application flight, he did not see power lines in his path and the helicopter struck the wires that and then the ground. The main rotor blades severed the tail boom of the helicopter during the event. In his report, the pilot listed no mechanical malfunctions or failures of the helicopter.
Probable cause
The pilot's inadequate monitoring of the environment and failure to maintain clearance from transmission wires during an aerial application flight. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- BKN
- Ceiling (ft)
- 5500
- Visibility (sm)
- 4
- Wind direction
- 300
- Wind speed (kt)
- 9
- Temperature (F)
- 77
- Nearest airport
- LANCASTER MUNI
- Distance from field
- 2.0
- Airport elevation
- 1008
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N8343P | ROBINSON HELICOPTER | R44 | SUBS | 137 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Maneuvering-low-alt flying Low altitude operation/event defining | Climb |
| 2 | Maneuvering-low-alt flying Collision with terr/obj (non-CFIT) | Climb |