N7119M accident

NTSB ANC14CA067 · 2014-08-23 · Talkeetna, AK

Docket — crew, injuries and powerplant

Summary

The pilot was departing, uphill, from a rough and uneven, tundra-covered off-airport site, which required a correction for a variable 10 knot left crosswind. The site was situated atop a mountain ridgeline. The pilot reported that during the takeoff roll the airplane hit a series of bumps and ruts, and it became airborne prematurely. He added that as the airplane continued to bounce, he braced himself against the rudder pedals, and he inadvertently depressed the brakes. When the airplane settled to the ground and the wheels touched down, the airplane slowed. In an effort to avoid rising terrain ahead, and in an attempt to gain airspeed, the pilot turned the airplane to the left and downslope. The airplane continued to descend and it subsequently collided with brush-covered terrain, sustaining substantial damage to the wings, fuselage, and empennage. The pilot reported no preimpact mechanical malfunction or failure with the airplane that would have precluded normal operation. The pilot also noted that he failed to use the predeparture checklist, and a postaccident inspection revealed that the propeller pitch control was found to be in a cruise power setting.

Full narrative

The pilot was departing, uphill, from a rough and uneven, tundra-covered off-airport site, which required a correction for a variable 10 knot left crosswind. The site was situated atop a mountain ridgeline. The pilot reported that during the takeoff roll the airplane hit a series of bumps and ruts, and it became airborne prematurely. He added that as the airplane continued to bounce, he braced himself against the rudder pedals, and he inadvertently depressed the brakes. When the airplane settled to the ground and the wheels touched down, the airplane slowed. In an effort to avoid rising terrain ahead, and in an attempt to gain airspeed, the pilot turned the airplane to the left and downslope. The airplane continued to descend and it subsequently collided with brush-covered terrain, sustaining substantial damage to the wings, fuselage, and empennage. The pilot reported no preimpact mechanical malfunction or failure with the airplane that would have precluded normal operation. The pilot also noted that he failed to use the predeparture checklist, and a postaccident inspection revealed that the propeller pitch control was found to be in a cruise power setting.

Probable cause

The pilot's selection of an unsuitable takeoff area, resulting in a loss of control and subsequent inflight collision with terrain during takeoff. Contributing to the accident was the pilot's failure to use the checklist, resulting in an improper propeller pitch setting for takeoff, and the pilot's inadvertent partial application of the wheel brakes during the takeoff roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
3
Temperature (F)
64
Nearest airport
Ridgeline
Distance from field
0.0
Airport elevation
300

Aircraft

RegistrationMakeModelDamageFAR part
N7119M — — SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff Loss of control in flight defining Takeoff
2 Takeoff Collision with terr/obj (non-CFIT) Takeoff

Findings

Finding
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot cause
Personnel issues-Task performance-Use of equip/info-Use of checklist-Pilot - F cause
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Pilot - F cause
Environmental issues-Physical environment-Terrain-Rough terrain-Contributed to outcome factor
Environmental issues-Physical environment-Terrain-Sloped/uneven-Contributed to outcome factor