N752EC Robinson Helicopter R44 accident
NTSB ERA14CA413 · 2014-08-17 · Hayesville, NC
Docket — crew, injuries and powerplant
Summary
According to the pilot, after landing the helicopter in front of a hangar, the helicopter began to rise and tilt. He increased the collective and "over corrected" with the cyclic, which resulted in the main rotor impacting the hangar. The helicopter settled onto the concrete apron and rolled over resulting in substantial damage to the fuselage and rotor blades. The pilot reported no preimpact mechanical malfunctions or failures with the helicopter that would have precluded normal operation.
Full narrative
According to the pilot, after landing the helicopter in front of a hangar, the helicopter began to rise and tilt. He increased the collective and "over corrected" with the cyclic, which resulted in the main rotor impacting the hangar. The helicopter settled onto the concrete apron and rolled over resulting in substantial damage to the fuselage and rotor blades. The pilot reported no preimpact mechanical malfunctions or failures with the helicopter that would have precluded normal operation.
Probable cause
The pilot's failure to maintain control of the helicopter, and adequate clearance, which resulted in a collision with a hangar. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- OVC
- Ceiling (ft)
- 1300
- Visibility (sm)
- 10
- Wind direction
- 260
- Wind speed (kt)
- 5
- Temperature (F)
- 73
- Distance from field
- 0.0
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N752EC | ROBINSON HELICOPTER | R44 | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Landing-flare/touchdown Collision during takeoff/land defining | Cruise |
| 2 | Landing-flare/touchdown Roll over | Cruise |