N4426M accident
NTSB CEN15CA007 · 2014-10-03 · Atlanta, AR
Docket — crew, injuries and powerplant
Summary
The helicopter had been transported to a remote area with the skid landing gear secured to the helicopter transport trailer with four heavy duty ratchet type tie-downs. After arrival at the work location the pilot and several ground crewmembers prepared the helicopter for an agricultural application flight. The pilot reported that during his walk-around inspection prior to the flight he had overlooked the right rear tie-down, and he attempted to takeoff with the tie-down still attached to the helicopter. As power was applied the helicopter immediately rolled to the right and impacted terrain. Both main rotor blades were impact separated mid-span and the transmission and skid landing gear were partially separated. The helicopter sustained substantial damage to the main rotor system, transmission, tail rotor, tail boom and fuselage. A postaccident examination found no preimpact mechanical anomalies with the helicopter. The characteristics displayed by the helicopter were indicative of it encountering a dynamic rollover.
Full narrative
The helicopter had been transported to a remote area with the skid landing gear secured to the helicopter transport trailer with four heavy duty ratchet type tie-downs. After arrival at the work location the pilot and several ground crewmembers prepared the helicopter for an agricultural application flight. The pilot reported that during his walk-around inspection prior to the flight he had overlooked the right rear tie-down, and he attempted to takeoff with the tie-down still attached to the helicopter. As power was applied the helicopter immediately rolled to the right and impacted terrain. Both main rotor blades were impact separated mid-span and the transmission and skid landing gear were partially separated. The helicopter sustained substantial damage to the main rotor system, transmission, tail rotor, tail boom and fuselage. A postaccident examination found no preimpact mechanical anomalies with the helicopter.
Probable cause
The pilot's inadequate preflight inspection when he did not remove a tie-down strap prior to takeoff, which resulted in a dynamic rollover. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- Serious
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- NONE
- Ceiling (ft)
- 0
- Visibility (sm)
- 10
- Wind direction
- 290
- Wind speed (kt)
- 9
- Temperature (F)
- 70
- Distance from field
- 0.0
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N4426M | — | — | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Prior to flight Aircraft inspection event | Standing |
| 2 | Takeoff Dynamic rollover defining | Takeoff |
| 3 | Takeoff Collision with terr/obj (non-CFIT) | Takeoff |
| 4 | Post-impact Part(s) separation from AC | Approach |
Findings
| Finding | |
|---|---|
| Aircraft-Aircraft handling/service-Parking/securing-Tie-down/mooring-Inadequate inspection | cause |
| Personnel issues-Action/decision-Action-Lack of action-Pilot | cause |