N8371F Mcdonnell Douglas Helicopter MD500 accident

NTSB ERA15CA055 · 2014-11-18 · Decatur, AL

Docket — crew, injuries and powerplant

Summary

According to the operator, a preflight was completed before the helicopter was moved to the landing zone and no anomalies were noted. The helicopter was then equipped with an aerial platform and measuring equipment to perform the planned work in the vicinity of powerlines. Subsequently, the helicopter departed the landing zone. Due to the atmospheric condition at the aerial work site, the pilot discontinued the aerial work and returned to the landing zone. A "senior" pilot was consulted, and replaced the first pilot. The "senior" pilot decided to depart and assess the situation from the air. A short time later the flight returned to the landing zone. The first pilot performed a "short" postflight examination of the helicopter and noticed that a main rotor blade was substantially damaged. The operator reported no preimpact mechanical malfunctions or failures with the helicopter that would have precluded normal operation. In addition, neither pilots nor crew members noticed any abnormal flight characteristics of the helicopter prior to discovering the main rotor blade damage. The investigation was unable to determine which flight the main rotor blade incurred the substantial damage.

Full narrative

According to the operator, a preflight was completed before the helicopter was moved to the landing zone and no anomalies were noted. The helicopter was then equipped with an aerial platform and measuring equipment to perform the planned work in the vicinity of powerlines. Subsequently, the helicopter departed the landing zone. Due to the atmospheric condition at the aerial work site, the pilot discontinued the aerial work and returned to the landing zone. A "senior" pilot was consulted, and replaced the first pilot. The "senior" pilot decided to depart and assess the situation from the air. A short time later the flight returned to the landing zone. The first pilot performed a "short" postflight examination of the helicopter and noticed that a main rotor blade was substantially damaged. The operator reported no preimpact mechanical malfunctions or failures with the helicopter that would have precluded normal operation. In addition, neither pilots nor crew members noticed any abnormal flight characteristics of the helicopter prior to discovering the main rotor blade damage. The investigation was unable to determine which flight the main rotor blade incurred the substantial damage.

Probable cause

An undetermined pilot's failure to maintain clearance from an electrical transmission tower resulting in substantial damage to a main rotor blade. Postaccident investigation could not determine which of two pilots was flying the helicopter at the time the damage occurred. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
320
Wind speed (kt)
11
Temperature (F)
25
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N8371F MCDONNELL DOUGLAS HELICOPTER MD500 SUBS 133

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying Low altitude operation/event defining Climb
2 Maneuvering-low-alt flying Collision with terr/obj (non-CFIT) Climb

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Altitude-Not attained/maintained cause
Personnel issues-Action/decision-Action-Incorrect action performance-Other/unknown cause