N132ES accident

NTSB GAA15CA003 · 2015-03-07 · San Manuel, AZ · near E77

Docket — crew, injuries and powerplant

Summary

The pilot was performing a no flap landing. About 5 feet over the runway, the pilot attempted to center the airplane over the center line but input too much rudder, the airplane landed hard, bounced, and then departed the runway to the left. The nose gear and left main landing gear separated from the fuselage; subsequently the left and right fuselage stringers sustained substantial damage. The pilot reported no pre-impact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

Full narrative

The pilot was performing a no flap landing. About 5 feet over the runway, the pilot attempted to center the airplane over the center line but input too much rudder, the airplane landed hard, bounced, and then departed the runway to the left. The nose gear and left main landing gear separated from the fuselage; subsequently the left and right fuselage stringers sustained substantial damage.

The pilot reported no pre-impact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

Probable cause

The pilot's failure to maintain directional control during landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
54
Nearest airport
SAN MANUEL
Distance from field
0.0
Airport elevation
3271

Aircraft

RegistrationMakeModelDamageFAR part
N132ES — — SUBS 091

Sequence of events

#OccurrencePhase
1 Approach-VFR pattern final Loss of control in flight Cruise
2 Landing-flare/touchdown Hard landing defining Cruise
3 Landing-landing roll Runway excursion Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause