N20062 Air Tractor Inc AT 602 accident

NTSB GAA15CA023 · 2015-03-27 · Ropesville, TX

Docket — crew, injuries and powerplant

Summary

During an aerial application flight in a tailwheel-equipped airplane, the commercial pilot departed the airstrip with a full load of insecticide, but then realized the airplane was equipped with improper spray nozzles, and returned to the airstrip. Considering the fully loaded configuration, the pilot made one low approach and reported that everything felt normal. On the next approach the pilot touched down on the dirt portion of the runway, applied beta (reverse thrust), and immediately the airplane began yawing to the left. The pilot applied right rudder and right brake but the airplane continued to yaw left. According to the pilot, the tailwheel was not down when beta was applied, which contributed to the subsequent loss of directional control. The airplane exited the runway to the left and bounced over several crop rows causing the left main landing gear to collapse. The propeller dug into the ground and the airplane nosed over, resulting in substantial damage to the firewall and right wing. When the airplane came to rest on its back, the pilot remained strapped in, upside down with his helmet on and visor down. The insecticide chemicals immediately began pouring over his face and he had the sensation that he was drowning. The pilot was able to release his seat belt and crawl out of the airplane through the emergency door. The pilot reported no mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Full narrative

During an aerial application flight in a tailwheel-equipped airplane, the commercial pilot departed the airstrip with a full load of insecticide, but then realized the airplane was equipped with improper spray nozzles, and returned to the airstrip. Considering the fully loaded configuration, the pilot made one low approach and reported that everything felt normal. On the next approach the pilot touched down on the dirt portion of the runway, applied beta (reverse thrust), and immediately the airplane began yawing to the left. The pilot applied right rudder and right brake but the airplane continued to yaw left. According to the pilot, the tailwheel was not down when beta was applied, which contributed to the subsequent loss of directional control.

The airplane exited the runway to the left and bounced over several crop rows causing the left main landing gear to collapse. The propeller dug into the ground and the airplane nosed over, resulting in substantial damage to the firewall and right wing.

When the airplane came to rest on its back, the pilot remained strapped in, upside down with his helmet on and visor down. The insecticide chemicals immediately began pouring over his face and he had the sensation that he was drowning. The pilot was able to release his seat belt and crawl out of the airplane through the emergency door. The pilot reported no mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot's failure to maintain directional control during landing. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
4
Temperature (F)
75
Nearest airport
Pro-Agri Spraying
Distance from field
0.0
Airport elevation
3500

Aircraft

RegistrationMakeModelDamageFAR part
N20062 AIR TRACTOR INC AT 602 SUBS 137

Sequence of events

#OccurrencePhase
1 Landing-landing roll Loss of control on ground defining Cruise
2 Landing-landing roll Runway excursion Cruise
3 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise
4 Landing-landing roll Landing gear collapse Cruise
5 Landing-landing roll Nose over/nose down Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause