N840AB Diamond Aircraft Ind Inc DA40 accident

NTSB GAA15CA072 · 2015-03-20 · Fuquay-Varina, NC · near 78NC

Docket — crew, injuries and powerplant

Summary

The pilot reported that during the landing roll on a grass airstrip, he did not get the airplane stopped before running off the end of the runway. He said the airplane exited the runway at a slow speed and rolled into a ditch. The right main landing gear bent rearward structurally damaging a fuselage bulkhead. The pilot reported that there were no mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

Full narrative

The pilot reported that during the landing roll on a grass airstrip, he did not get the airplane stopped before running off the end of the runway. He said the airplane exited the runway at a slow speed and rolled into a ditch. The right main landing gear bent rearward structurally damaging a fuselage bulkhead. The pilot reported that there were no mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

Probable cause

The pilot's failure to maintain control of the airplane during the landing roll, which resulted in a runway overrun. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
190
Wind speed (kt)
5
Temperature (F)
63
Nearest airport
FUQUAY/ANGIER FIELD
Distance from field
0.0
Airport elevation
349

Aircraft

RegistrationMakeModelDamageFAR part
N840AB DIAMOND AIRCRAFT IND INC DA40 SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Runway excursion defining Cruise
2 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Surface speed/braking-Not attained/maintained cause