N9987J accident

NTSB WPR15CA173 · 2015-05-31 · Ismay, MT

Docket — crew, injuries and powerplant

Summary

The pilot reported that he had successfully flown five aerial application flights prior to the accident flight with loads that were only half of capacity. This make/model airplane was new to the pilot, but he felt comfortable with the airplane having accumulated about 15 hours at the time of the accident. During the takeoff roll, the airplane hit a bump about halfway down the runway, and started to porpoise. The pilot stated that he started losing directional control, and applied the brakes. After regaining control, the airplane was not aligned with the runway; however, he continued the takeoff, thinking that the airplane was going to fly. The airplane subsequently departed the runway surface, collided with a three-strand wire fence, and bounced across a dike. The collision with the fence damaged the landing gear, and the airplane skidded to a stop. Both wings, both main landing gear, and the engine mount sustained substantial damage. The pilot reported no mechanical malfunctions or failures with the airplane or engine that would have precluded normal operation.              

Full narrative

The pilot reported that he had successfully flown five aerial application flights prior to the accident flight with loads that were only half of capacity. This make/model airplane was new to the pilot, but he felt comfortable with the airplane having accumulated about 15 hours at the time of the accident.

During the takeoff roll, the airplane hit a bump about halfway down the runway, and started to porpoise. The pilot stated that he started losing directional control, and applied the brakes. After regaining control, the airplane was not aligned with the runway; however, he continued the takeoff, thinking that the airplane was going to fly. The airplane subsequently departed the runway surface, collided with a three-strand wire fence, and bounced across a dike. The collision with the fence damaged the landing gear, and the airplane skidded to a stop. Both wings, both main landing gear, and the engine mount sustained substantial damage. The pilot reported no mechanical malfunctions or failures with the airplane or engine that would have precluded normal operation.

Probable cause

The pilot's incorrect action to continue the takeoff when he failed to maintain directional control during the takeoff roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
1000
Visibility (sm)
5
Wind direction
330
Wind speed (kt)
26
Temperature (F)
43
Nearest airport
Baldwin Ranch Strip
Distance from field
0.0
Airport elevation
2530

Aircraft

RegistrationMakeModelDamageFAR part
N9987J — — SUBS 137

Sequence of events

#OccurrencePhase
1 Takeoff Loss of control on ground defining Takeoff
2 Takeoff Runway excursion Takeoff
3 Takeoff Collision with terr/obj (non-CFIT) Takeoff

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Personnel issues-Action/decision-Action-Incorrect action performance-Pilot cause
Personnel issues-Experience/knowledge-Experience/qualifications-Total experience w/ equipment-Pilot factor
Environmental issues-Physical environment-Object/animal/substance-Fence/fence post-Not specified factor