N2159C Wsk Pzl Mielec M 18A accident

NTSB GAA15CA135 · 2015-06-23 · Nyssa, OR · near 97OG

Docket — crew, injuries and powerplant

Summary

The pilot reported that during the takeoff roll, the airplane rolled over a bump on the runway surface and became airborne. The airplane descended to the runway while operating at takeoff power, resulting in a departure end runway excursion and collided with terrain. The airplane sustained substantial damage to the wings, fuselage and rudder. The pilot reported that there were no mechanical malfunctions or failures with the airplane prior to the flight that would have precluded normal operation.

Full narrative

The pilot reported that during the takeoff roll, the airplane rolled over a bump on the runway surface and became airborne. The airplane descended to the runway while operating at takeoff power, resulting in a departure end runway excursion and collided with terrain. The airplane sustained substantial damage to the wings, fuselage and rudder.

The pilot reported that there were no mechanical malfunctions or failures with the airplane prior to the flight that would have precluded normal operation.

Probable cause

The pilot's failure to maintain directional control during takeoff, resulting in a runway excursion and collision with terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
330
Wind speed (kt)
8
Temperature (F)
66
Nearest airport
BYBEE FIELD
Distance from field
0.0
Airport elevation
2150

Aircraft

RegistrationMakeModelDamageFAR part
N2159C WSK PZL MIELEC M 18A SUBS 137

Sequence of events

#OccurrencePhase
1 Takeoff Runway excursion defining Takeoff
2 Takeoff Collision with terr/obj (non-CFIT) Takeoff

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause