N71108 accident

NTSB GAA15CA182 · 2015-07-03 · Llano, TX · near AQO

Docket — crew, injuries and powerplant

Summary

The pilot reported that during touchdown, he bounced three times and then attempted a go-around. During the attempted go around, the airplane veered to the left, departed the runway, and came to rest in uneven terrain. The fuselage and both wings sustained substantial damage during the accident. The pilot did not report any mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Full narrative

The pilot reported that during touchdown, he bounced three times and then attempted a go-around. During the attempted go around, the airplane veered to the left, departed the runway, and came to rest in uneven terrain. The fuselage and both wings sustained substantial damage during the accident.

The pilot did not report any mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot's failure to maintain directional control during an attempted go-around, which resulted in a runway excursion and a collision with terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
9
Wind direction
250
Wind speed (kt)
7
Temperature (F)
88
Nearest airport
LLANO MUNI
Distance from field
0.0
Airport elevation
1101

Aircraft

RegistrationMakeModelDamageFAR part
N71108 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Abnormal runway contact Cruise
2 Landing-aborted after touchdown Loss of control on ground defining Cruise
3 Landing-aborted after touchdown Runway excursion Cruise
4 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause