N945S accident

NTSB GAA16CA012 · 2015-10-11 · Kanab, UT · near KNB

Docket — crew, injuries and powerplant

Summary

The pilot reported that after he had started the airplane's engine, he noticed an error in the route programmed in the global positioning system (GPS). The pilot reported the airplane had begun to roll forward as he made changes to the GPS programming and he was not aware the airplane was moving. The airplane collided with a steel pole and sustained substantial damage to fuselage and wing. The pilot reported no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

Full narrative

The pilot reported that after he had started the airplane's engine, he noticed an error in the route programmed in the global positioning system (GPS). The pilot reported the airplane had begun to roll forward as he made changes to the GPS programming and he was not aware the airplane was moving. The airplane collided with a steel pole and sustained substantial damage to fuselage and wing.

The pilot reported no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

Probable cause

The pilot's failure to monitor the airplane's movement on the ground while programming the GPS, which resulted in a collision with a pole. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
72
Nearest airport
KANAB MUNI
Distance from field
0.0
Airport elevation
4868

Aircraft

RegistrationMakeModelDamageFAR part
N945S — — SUBS 091

Sequence of events

#OccurrencePhase
1 Standing-engine(s) operating Airport occurrence defining Standing
2 Standing-engine(s) operating Collision with terr/obj (non-CFIT) Standing

Findings

Finding
Personnel issues-Psychological-Attention/monitoring-Task monitoring/vigilance-Pilot cause
Aircraft-Aircraft handling/service-Towing and taxiing-Taxiing-Incorrect use/operation cause
Environmental issues-Physical environment-Object/animal/substance-Pole-Effect on equipment factor