N862C accident

NTSB WPR16CA077 · 2016-02-25 · Livermore, CA · near LVK

Docket — crew, injuries and powerplant

Summary

**This report was modified on February 20, 2020. Please see the public docket for this accident to view the original report.** The pilot reported that during the landing on runway 25L in the tail-wheel equipped airplane, it touched down in a three-point landing attitude on the centerline. Shortly thereafter, it started to veer to the right. The pilot applied full left rudder and brake application; however, the airplane continued to veer off the right edge of the runway into tall grass and ground looped. The airplane sustained substantial damage to the left wing. While taxiing the airplane back to the hangar, the pilot stated that he noticed that the wind was blowing from the northeast and that runway 7L was now in use. He also noticed that the left rudder/brake pedal required more travel distance than the right pedal, with reduced brake effectiveness on the left side. The National Transportation Safety Board's (NTSB) postaccident examination of the brake system found no evidence of preimpact mechanical malfunctions or failures were revealed that would have precluded normal operation. Subsequent to the NTSB's examination, a mechanic examined the tailwheel unit and found that it was loosely mounted and that the steering springs were weak. The mechanic then disassembled the tailwheel unit and found that the mount hole was excessively large and that a dowel and compression spring were worn. The mechanic's findings were consistent with wear over time and not a sudden failure. Thus, the issues with the tailwheel assembly existed before the accident and likely contributed to the uncommanded right turn; however, with appropriate braking, the pilot should have been able to regain directional control and keep the airplane on the runway. The airplane's last annual inspection before the accident occurred on August 20, 2015. The issues with the tailwheel assembly would have developed over a period of time that was much longer than the 6 months between the annual inspection and the accident. Thus, maintenance personnel should have detected the tailwheel assembly issues during the annual inspection.  

Full narrative

The pilot reported that during the landing on runway 25L in the tail-wheel equipped airplane, it touched down in a three-point landing attitude on the centerline. Shortly thereafter, it started to veer to the right. The pilot applied full left rudder and brake application; however, the airplane continued to veer off the right edge of the runway into tall grass and ground looped. The airplane sustained substantial damage to the left wing.

While taxiing the airplane back to the hangar, the pilot stated that he noticed that the wind was blowing from the northeast and that runway 7L was now in use. He also noticed that the left rudder/brake pedal required more travel distance than the right pedal, with reduced brake effectiveness on the left side.

During a postaccident examination of the brake system, no evidence of preimpact mechanical malfunctions or failures were revealed that would have precluded normal operation.

Probable cause

The pilot's failure to maintain directional control during the landing roll. Contributing to the accident was maintenance personnel's failure to detect the worn tailwheel assembly during the airplane's annual inspection. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
10
Temperature (F)
64
Nearest airport
LIVERMORE MUNI
Distance from field
0.0
Airport elevation
399

Aircraft

RegistrationMakeModelDamageFAR part
N862C — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Loss of control on ground defining Cruise
2 Landing-landing roll Runway excursion Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft systems-Landing gear system-Nose/tail landing gear-Fatigue/wear/corrosion - F cause
Aircraft-Aircraft systems-Landing gear system-Nose/tail landing gear-Failure - F cause
Aircraft-Aircraft systems-Landing gear system-Nose/tail landing gear-Inadequate inspection - F cause
Personnel issues-Task performance-Inspection-Scheduled/routine inspection-Maintenance personnel - F cause