N6181Q Air Tractor Inc AT 502 accident

NTSB GAA16CA224 · 2016-05-08 · Oberlin, KS · near OIN

Docket — crew, injuries and powerplant

Summary

The pilot of the tailwheel equipped airplane reported that during the landing roll, as the airplane slowed down, the tailwheel lifted off the ground. He further reported that the airplane veered to the right despite left rudder and brake application, exited the runway, and ground looped. According to the pilot there were no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation. The airplane sustained substantial damage to the fuselage and empennage.

Full narrative

The pilot of the tailwheel equipped airplane reported that during the landing roll, as the airplane slowed down, the tailwheel lifted off the ground. He further reported that the airplane veered to the right despite left rudder and brake application, exited the runway, and ground looped.

According to the pilot there were no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

The airplane sustained substantial damage to the fuselage and empennage.

Probable cause

The pilot's failure to maintain directional control during the landing roll, which resulted in runway excursion, and a ground loop. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
73
Nearest airport
OBERLIN MUNI
Distance from field
0.0
Airport elevation
2707

Aircraft

RegistrationMakeModelDamageFAR part
N6181Q AIR TRACTOR INC AT 502 SUBS 137

Sequence of events

#OccurrencePhase
1 Landing Loss of control on ground defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause