N1222V accident

NTSB ANC16CA049 · 2016-07-20 · Cordova, AK

Docket — crew, injuries and powerplant

Summary

The pilot reported that while landing the tricycle-geared airplane on a remote beach, he "landed a little hard, but not too hard." Following touchdown, the right main landing separated at the axle, the right wing impacted the ground, and the left main landing gear collapsed. Subsequently, the left wing and the left horizontal stabilizer impacted the ground and sustained substantial damage. The pilot reported that there were no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation. The Federal Aviation Administration has published the Airplane Flying Handbook FAA-H-8083-3A (2004). This handbook discusses soft-field landings and states in part: Landing on fields that are rough or have soft surfaces, such as snow, sand, mud, or tall grass requires unique procedures. When landing on such surfaces, the objective is to touch down as smoothly as possible, and at the slowest possible landing speed. The pilot must control the airplane in a manner that the wings support the weight of the airplane as long as practical, to minimize drag and stresses imposed on the landing gear by the rough or soft surface.

Full narrative

The pilot reported that while landing the tricycle-geared airplane on a remote beach, he "landed a little hard, but not too hard." Following touchdown, the right main landing separated at the axle, the right wing impacted the ground, and the left main landing gear collapsed. Subsequently, the left wing and the left horizontal stabilizer impacted the ground and sustained substantial damage.

The pilot reported that there were no preimpact mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

The Federal Aviation Administration has published the Airplane Flying Handbook FAA-H-8083-3A (2004). This handbook discusses soft-field landings and states in part:

Landing on fields that are rough or have soft surfaces, such as snow, sand, mud, or tall grass requires unique procedures. When landing on such surfaces, the objective is to touch down as smoothly as possible, and at the slowest possible landing speed. The pilot must control the airplane in a manner that the wings support the weight of the airplane as long as practical, to minimize drag and stresses imposed on the landing gear by the rough or soft surface.

Probable cause

The pilot's improper landing flare, which resulted in a hard landing and subsequent landing gear separation and collapse. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
2100
Visibility (sm)
6
Wind direction
40
Wind speed (kt)
4
Temperature (F)
55
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N1222V — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Off-field or emergency landing Cruise
2 Landing-flare/touchdown Hard landing defining Cruise
3 Landing-flare/touchdown Part(s) separation from AC Cruise
4 Landing-flare/touchdown Loss of control on ground Cruise
5 Landing-flare/touchdown Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Landing flare-Incorrect use/operation cause
Environmental issues-Physical environment-Runway/land/takeoff/taxi surface-Soft surface-Effect on equipment factor