N3003N Ayres Corporation S 2R accident

NTSB GAA16CA451 · 2016-08-25 · Cordele, GA

Docket — crew, injuries and powerplant

Summary

According to the pilot, he was maneuvering at low altitude, while performing an agricultural aerial application flight. He reported that he decided to fly underneath power lines and misjudged the height of the lines in relation to the airplane. He recalled that the airplane's vertical stabilizer and rudder struck the power lines. He landed the airplane in a field and the landing gear collapsed. The vertical stabilizer, rudder, left wing and fuselage sustained substantial damage. The Federal Aviation Administration Aviation Safety Inspector that interviewed the pilot shortly after the accident, reported that the pilot stated that the sun was in his eyes as he passed under the power lines. He reported that the pilot did not immediately execute a precautionary landing after striking the lines; instead he made one more spray pass. The pilot reported that there were no mechanical malfunctions or anomalies during the flight that would have prevented normal flight operations. During the course of the investigation, the NTSB Investigator-in-charge attempted to contact the pilot on multiple occasions to no avail. The pilot did not submit an NTSB Form 6120.1.

Full narrative

According to the pilot, he was maneuvering at low altitude, while performing an agricultural aerial application flight. He reported that he decided to fly underneath powerline wires and misjudged the height of the wires in relation to the airplane. He recalled that the airplane's vertical stabilizer and rudder struck the powerline wires. He landed the airplane in a field and the landing gear collapsed. The vertical stabilizer, rudder, left wing and fuselage sustained substantial damage.

The Federal Aviation Administration Aviation Safety Inspector that interviewed the pilot shortly after the accident, reported that the pilot stated that the sun was in his eyes as he passed under the powerline wires. He reported that the pilot did not immediately execute a precautionary landing after striking the wires; instead he made one more spray pass.

The pilot reported that there were no mechanical malfunctions or anomalies during the flight that would have prevented normal flight operations.

During the course of the investigation, the NTSB Investigator-in-charge attempted to contact the pilot on multiple occasions to no avail. The pilot did not submit an NTSB Form 6120.1.

Probable cause

The pilot’s failure to maintain clearance from power lines during an agricultural application flight while flying toward the sun. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
6500
Visibility (sm)
10
Wind direction
0
Temperature (F)
77
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N3003N AYRES CORPORATION S 2R SUBS 137

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying Collision with terr/obj (non-CFIT) Climb
2 Maneuvering-low-alt flying Off-field or emergency landing Climb
3 Other Miscellaneous/other defining Landing

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Environmental issues-Physical environment-Object/animal/substance-Wire-Effect on equipment cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Altitude-Not attained/maintained cause
Environmental issues-Conditions/weather/phenomena-Light condition-Bright light-Effect on personnel factor