N300SB Schneider K/Cook C SC SKYBOLT accident

NTSB WPR16LA174 · 2016-08-24 · Corvallis, OR · near CVO

Docket — crew, injuries and powerplant

Summary

The father of the passenger reported that his son, who was the passenger and owner, had just purchased the airplane, that a prepurchase inspection was conducted, and that “everything looked good.” The pilot was conducting a personal, local flight in the airplane, which included normal maneuvers and several touch-and-go landings with no issues. However, after the last landing and while taxiing the airplane back to the ramp, the left main landing gear (MLG) collapsed. Examination of the left MLG’s truss structure, which is welded to the fuselage, revealed substantial damage to the fuselage frame structure. Examination also revealed that a weld joint where the truss mounts to the fuselage was cracked and broken. Rust was noted around the weld area, and it appeared that a previous crack had been repaired. The father reported that the area of the failure was hidden behind the bungee and was not visible during the prepurchase inspection. Given the evidence, it is likely that the left main landing gear collapsed due to the weld joint failure.

Full narrative

On August 24, 2016, about 1500 Pacific daylight time, an experimental, amateur-built Skybolt airplane, N300SB, was substantially damaged when it was involved in an accident near Corvallis, Oregon. The pilot and passenger were not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight. The father of the passenger, who was the owner, reported that his son had just purchased the airplane, that a prepurchase inspection was conducted, and that “everything looked good.” He said his son asked the pilot to fly with him because he had extensive experience in similar airplanes. The flight included normal maneuvers and several touch-and-go landings with no issues. However, after the last landing and as he was taxiing the airplane back to the ramp, the left main landing gear (MLG) collapsed. Examination of the MLG truss structure, which is welded to the fuselage, revealed substantial damage to the fuselage frame structure. Examination also revealed that a weld joint where the truss mounts to the fuselage was cracked and broken. Rust was noted around the weld area, and it appeared that a previous crack had been repaired. The father reported that the area of the failure was hidden behind the bungee and was not visible during the prepurchase inspection.

Probable cause

The collapse of the left main landing gear truss due to a weld joint failure, which resulted in substantial damage to the fuselage frame structure. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
20
Wind speed (kt)
9
Temperature (F)
91
Nearest airport
CORVALLIS MUNI
Distance from field
0.0
Airport elevation
249

Aircraft

RegistrationMakeModelDamageFAR part
N300SB SCHNEIDER K/COOK C SC SKYBOLT SUBS 091

Sequence of events

#OccurrencePhase
1 Taxi Landing gear collapse defining Taxi

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Fatigue/wear/corrosion cause