N91JW Aerotek PITTS SPECIAL accident

NTSB GAA16CA500 · 2016-09-17 · Reno, NV · near RTS

Docket — crew, injuries and powerplant

Summary

According to the pilot of the tailwheel-equipped biplane, during the landing roll, the tailwheel became "stuck" in an expansion joint that runs down the centerline of the runway. She reported that when the tailwheel became unstuck, the biplane "swung wildly to the left," the bottom right wing struck the ground, and the airplane came to a stop on the runway after turning 180° to the left. A video of the accident, taken by a camera mounted on the accident biplane and posted on social media, revealed that the biplane touched down on the runway to the left of the centerline. During the landing roll and after crossing the taxiway A2 intersection, the biplane began drifting right. The tailwheel is seen crossing the centerline expansion joint about 30° to the joint and then rolling over the joint without hesitation. The tail is then seen swinging to the right at an increasing rate. The biplane ground looped to the left, and the bottom right wing sustained substantial damage. The pilot reported that there were no preaccident mechanical failures or anomalies with the airplane that would have prevented normal operation.

Full narrative

According to the pilot of the tailwheel-equipped biplane, during the landing roll the tailwheel became "stuck" in an expansion joint that runs down the centerline of the runway. She reported that when the tailwheel came unstuck, the biplane "swung wildly to the left", the bottom right wing struck the ground, and the airplane came to a stop on the runway after turning 180° to the left.

A video of the accident, taken by a camera mounted on the accident biplane and posted on social media revealed that the biplane touched down on the runway to the left of the centerline. During the landing roll, after crossing the taxiway A2 intersection, the biplane began drifting to the right. The tailwheel is seen crossing the centerline expansion joint about 30° to the joint, and rolls over the joint without hesitation. The tail is then seen swinging to the right at an increasing rate. The biplane ground looped to the left and the bottom right wing sustained substantial damage.

The pilot reported that there were no mechanical failures or anomalies that would have prevented normal operation.

Probable cause

The pilot’s failure to maintain directional control during the landing roll, which resulted in a ground loop. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
180
Wind speed (kt)
3
Temperature (F)
72
Nearest airport
RENO/STEAD
Distance from field
0.0
Airport elevation
5050

Aircraft

RegistrationMakeModelDamageFAR part
N91JW AEROTEK PITTS SPECIAL SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Abnormal runway contact Cruise
2 Landing-landing roll Loss of control on ground defining Cruise
3 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause