N522KC Robinson R22 BETA accident

NTSB CEN17LA099 · 2016-10-28 · Asherton, TX

Docket — crew, injuries and powerplant

Summary

The helicopter experienced a loss in rotor rpm while maneuvering during a low-level wildlife survey. The commercial pilot then performed a forced landing to a field. Postaccident examination of the helicopter revealed that one of the engine magnetos had an internal timing, efficiency gap failure, which would have resulted in improper engine ignition timing and loss of engine power/rpm. Examination also revealed that the magneto distributer gear was loose and that the distributer gear bushing was flapping around.

Full narrative

On October 28, 2016, at 1000 central daylight time, a Robinson Helicopter R22 Beta, N522KC, impacted terrain during a forced landing after a partial loss of engine power near Asherton, Texas. The helicopter sustained substantial damage. The pilot was uninjured. The helicopter was registered to Rotor Spec Aviation LLC and operated by the pilot under Title 14 Code of Federal Regulations Part 91 as an aerial wildlife survey flight that was not operating on a flight plan. Day visual meteorological conditions prevailed at the time of the accident. The local flight originated from Asherton, Texas at time unknown.

A National Transportation Safety Board (NTSB) Pilot/Operator Aircraft Accident/Incident Report was not received from the pilot.

According to a Federal Aviation Administration inspector, the helicopter experienced a loss in rotor rpm while maneuvering at low level during a wildlife survey. The pilot then performed a forced landing to a field. Post-accident examination of the helicopter revealed a failure of one of the engine magnetos.

The wreckage had been moved and sold by the operator without the knowledge of the Federal Aviation Administration inspector and the NTSB.

The NTSB Investigator-in-Charge located the engine at an engine maintenance facility whose representative stated that he examined the engine magnetos and one of the magnetos, Bendix model number S4LSC-200, part number 10-600614-1, serial number J229358E, had an internal timing, efficiency gap (E-gap) failure. He said the magneto distributer gear was loose, and the distributer gear bushing was "flapping" around.

Probable cause

The partial loss of engine power due to the failure of the magneto's internal timing during low-altitude maneuvering. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
80
Wind speed (kt)
5
Temperature (F)
73
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N522KC ROBINSON R22 BETA SUBS 091

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying Powerplant sys/comp malf/fail Climb
2 Maneuvering-low-alt flying Loss of engine power (partial) defining Climb
3 Emergency descent Off-field or emergency landing Descent

Findings

Finding
Aircraft-Aircraft power plant-Ignition system-Magneto/distributor-Failure cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Prop/rotor parameters-Attain/maintain not possible cause