N6640Z Hughes OH 6A accident

NTSB GAA17CA135 · 2017-02-08 · Price, UT

Docket — crew, injuries and powerplant

Summary

The helicopter pilot reported that, after landing to refuel, he reduced power to flight idle and initiated a 2-minute cooldown before shutting off the engine. One minute into the cooldown, the fuel truck approached the helicopter from the rear and struck the main rotor blades. The helicopter sustained substantial damage to the main rotor blades.

Full narrative

The helicopter pilot reported that after landing to refuel, he reduced power to flight idle and initiated a 2-minute cool down prior to shutting off the engine. He further reported that one minute into the cool down, the fuel truck approached the helicopter from the rear and struck the main rotor blades.

The helicopter sustained substantial damage to the main rotor blades.

The pilot reported that there were no preaccident mechanical failures or malfunctions with the airframe or engine that would have precluded normal operation.

Probable cause

The fuel truck driver’s failure to stop before impacting the helicopter’s main rotor blades. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
80
Wind speed (kt)
4
Temperature (F)
48
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N6640Z HUGHES OH 6A SUBS PUBU

Sequence of events

#OccurrencePhase
1 Standing-engine(s) operating Ground handling event defining Standing

Findings

Finding
Personnel issues-Experience/knowledge-Knowledge-Knowledge of procedures-Flight service personnel factor
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Flight service personnel cause
Environmental issues-Physical environment-Object/animal/substance-Ground vehicle-Effect on operation cause