N7118U accident

NTSB GAA17CA260 · 2017-05-02 · Olathe, KS · near OJC

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that, during the initial climb, about 1,000 ft above the ground, he "saw the engine power winding down." He added that he "turned on" the boost pump, checked the magnetos and fuel mixture, and then switched the fuel selector to the other fuel tank. The engine experienced a total loss of power and then impacted the ground. The airplane sustained substantial damage to the fuselage. The Federal Aviation Administration inspector reported that he traveled to the accident, and while on-site, he observed that the fuel selector knob set screw was loose and that the knob turned freely on the shaft. The set screw doesn’t keep the knob keyed; it just stops it from coming off. A roll pin keeps the shaft in position and was observed in the selector well. The pilot did not submit the National Transportation Safety Board Form 6120.1 Pilot/Operator Aircraft Accident/Incident Report.

Probable cause

The separated fuel tank selector knob roll pin, which prevented the fuel selector from moving to the fuel tank position for the tank with usable fuel and resulted in fuel starvation and the subsequent total loss of engine power. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
10
Wind speed (kt)
3
Temperature (F)
64
Nearest airport
JOHNSON COUNTY EXECUTIVE
Distance from field
0.0
Airport elevation
1096

Aircraft

RegistrationMakeModelDamageFAR part
N7118U — — SUBS 091

Sequence of events

#OccurrencePhase
1 Prior to flight Unknown or undetermined Standing
2 Takeoff Fuel starvation defining Takeoff
3 Takeoff Loss of engine power (total) Takeoff
4 Takeoff Collision with terr/obj (non-CFIT) Takeoff

Findings

Finding
Aircraft-Aircraft systems-Fuel system-Fuel selector/shutoff valve-Malfunction cause