N123XZ Gaddis Michael EXEC 162 F accident

NTSB CEN17LA365 · 2017-09-16 · Plymouth, IN

Docket — crew, injuries and powerplant

Summary

As the helicopter approached the airport, the pilot reported that the helicopter's engine rpm increased, and the rotor rpm decayed. He conducted an autorotation to the field. An examination of the helicopter revealed that the helicopter's main rotor drive belt/cog belt lost teeth resulting in a failure of the belt to drive the main rotor blades. The drive belt had recently been installed, about 3.5 hours prior to the accident. The circumstances of the accident are consistent with improper tension of the cog belt resulting in a failure of the belt.

Full narrative

On September 16, 2017, about 1715 eastern daylight time, an amateur-built Exec 162-F helicopter, N123XZ, performed a forced landing to a field near Plymouth, Indiana. The pilot and passenger were not injured, and the helicopter was substantially damaged. The helicopter was registered to North Indiana Rotor LLC and operated by a private individual under the provisions of 14 Code of Federal Regulations Part 91 as a personal flight. Visual meteorological conditions prevailed for the flight, which operated without a flight plan. The local flight departed from Plymouth Municipal Airport (C65), Plymouth, Indiana.The pilot reported that while approaching the airport, the helicopter's engine rpm increased, and the rotor rpm decayed. Unable to maintain altitude, the pilot conducted an autorotation to a field. The helicopter landed hard, the skids bent, and the tail boom buckled, resulting in substantial damage.

An examination of the helicopter by the responding Federal Aviation Administration inspector revealed that the helicopter had a Pro Drive system driving the main rotor blades. The main rotor drive belt/cog belt began losing teeth resulting in a failure of the belt to drive the main rotor blades. The Goodyear Falcon PD belt had recently been installed, about 3.5 hours prior to the accident.

Probable cause

A failure of the drive belt for reasons that could not be determined based on the available information. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
200
Wind speed (kt)
4
Temperature (F)
82
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N123XZ GADDIS MICHAEL EXEC 162 F SUBS 091

Sequence of events

#OccurrencePhase
1 Approach Sys/Comp malf/fail (non-power) defining Cruise
2 Landing-flare/touchdown Hard landing Cruise

Findings

Finding
Aircraft-Aircraft propeller/rotor-Main rotor drive-(general)-Failure cause
Not determined-Not determined-(general)-(general)-Unknown/Not determined cause