N214AM Bell Helicopter Textron Canada 407 accident

NTSB CEN18CA072 · 2018-01-05 · Norfolk, NE

Docket — crew, injuries and powerplant

Summary

The pilot and two medical crewmembers were on a return flight to a hospital helipad. During the approach to the helipad, the crew heard a noise outside the helicopter. The medical crewmembers reported they felt a slight "shudder" on the helicopter but attributed it to the wind as they approached the helipad. The pilot heard the noise, but there was no effect on the controls or flight characteristics, so he continued the landing without further incident. After engine shutdown, the oncoming pilot noticed that the helicopter's tail rotor drive shaft cover was missing. The surrounding area near the helicopter's approach path was searched, and the missing cover was found. An examination of the helicopter noted substantial damage to the tail rotor drive shaft. The day before the accident, scheduled maintenance was performed on the helicopter's tail rotor pitch change mechanism, which required removal of the drive shaft cover. The cover was reinstalled, and no problems were reported during a subsequent preflight inspection. It is likely that maintenance personnel did not properly secure the cover fasteners after the cover was reinstalled.

Full narrative

The pilot and two medical crewmembers were on a return flight to a hospital helipad. During the approach to the helipad, the crew heard a noise outside the helicopter. The medical crewmembers reported they felt a slight "shudder" on the helicopter but attributed it to the wind as they approached the helipad. The pilot heard the noise, but there was no effect on the controls or flight characteristics, so he continued the landing without further incident. After engine shutdown, the on-coming pilot noticed the helicopter's tail rotor drive shaft cover missing. A search of the surrounding area near the helicopter's approach path, located the missing cover.

An examination of the helicopter noted substantial damage to the tail rotor drive shaft.

The day prior to the accident, scheduled maintenance was performed on the helicopter's tail rotor pitch change mechanism, which required removal of the drive shaft cover. The cover was reinstalled, and no problems were reported during a subsequent pre-flight inspection.

It is likely the cover fasteners were not properly secured, after the cover was re-installed.

Probable cause

Maintenance personnel’s failure to properly secure the tail rotor drive shaft cover, which resulted in the cover departing the helicopter in flight. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Night/Dark
Ceiling (ft)
0
Wind direction
90
Wind speed (kt)
5
Temperature (F)
9
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N214AM BELL HELICOPTER TEXTRON CANADA 407 SUBS 135

Sequence of events

#OccurrencePhase
1 Prior to flight Aircraft maintenance event Standing
2 Enroute Part(s) separation from AC defining Climb

Findings

Finding
Personnel issues-Task performance-Maintenance-Scheduled/routine maintenance-Maintenance personnel cause
Aircraft-Aircraft handling/service-Maintenance/inspections-(general)-Incorrect service/maintenance cause