N271BJ accident

NTSB GAA18CA119 · 2018-02-05 · Juneau, AK

Docket — crew, injuries and powerplant

Summary

The pilot of the wheel-equipped airplane reported that, while landing on an unimproved snow-covered airstrip, he misjudged the surface condition. He added that, as the nose gear touched down, the wheel broke through the snow and that the airplane turned sideways and then nosed over. The airplane sustained substantial damage to the front windshield and both wings. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Full narrative

The pilot of the wheel-equipped airplane reported that, while landing on an unimproved snow-covered airstrip, he misjudged the surface condition. He added that, as the nose gear touched down the wheel broke through the snow, turned sideways, and the airplane nosed over.

The airplane sustained substantial damage to the front windshield and both wings.

The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot’s selection of unsuitable terrain for landing, which resulted in a nose-over. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
110
Wind speed (kt)
4
Temperature (F)
19
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N271BJ — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Loss of control on ground defining Cruise
2 Landing Nose over/nose down Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot cause
Environmental issues-Physical environment-Runway/land/takeoff/taxi surface-Snow/slush/ice covered surface-Effect on operation factor