N622MP Robinson Helicopter R22 accident

NTSB GAA18CA210 · 2018-04-11 · Franklin, CA · near F72

Docket — crew, injuries and powerplant

Summary

The flight instructor in the helicopter reported that, while demonstrating a touchdown autorotation to the pilot receiving instruction, the helicopter landed in a "normal run-on landing configuration." He added that the pilot receiving instruction applied aft cyclic about 15 ft into the forward ground run. The flight instructor moved the cyclic into the neutral position and lowered the collective as quickly as possible to slow the groundspeed. The helicopter "jumped" up and yawed to the left and spun about 150° before coming to rest. The flight instructor felt abnormal vibration in the cyclic and collective. He opened the door to inspect the helicopter and saw that the main rotor had struck the tailboom. The helicopter sustained substantial damage to the tailboom. The flight instructor reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation. Federal Aviation Administration's Helicopter Flying Handbook, FAA-H-8083-21A, contains a section titled "Autorotation " which states: After the helicopter has come to a complete stop after touchdown, lower the collective pitch to the full-down position. Do not try to stop the forward ground run with aft cyclic, as the main rotor blades can strike the tail boom. Rather, by lowering the collective slightly during the ground run, more weight is placed on the undercarriage, slowing the helicopter.

Full narrative

The flight instructor in the helicopter reported that, while demonstrating a touchdown autorotation to the pilot receiving instruction, the helicopter landed in a "normal run-on landing configuration." He added that the pilot receiving instruction applied aft cyclic about 15 ft into the forward ground run. The flight instructor moved the cyclic into the neutral position and lowered the collective as quickly as possible, to slow the ground speed. The helicopter "jumped" up and yawed to the left and spun the helicopter about 150° before coming to rest. The flight instructor felt abnormal vibration in the cyclic and collective. He opened the door to inspect the helicopter and saw that the main rotor had struck the tailboom.

The helicopter sustained substantial damage to the tailboom.

The flight instructor reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.

The automated weather observation station located 12 miles north of the accident airport reported that, about 17 minutes before the accident, the wind was from 220° at 7 knots. The helicopter landed on runway 18.

Federal Aviation Administration's Helicopter Flying Handbook, FAA-H-8083-21A, contains a section titled "Autorotation " which states:

After the helicopter has come to a complete stop after touchdown, lower the collective pitch to the full-down position. Do not try to stop the forward ground run with aft cyclic, as the main rotor blades can strike the tail boom. Rather, by lowering the collective slightly during the ground run, more weight is placed on the undercarriage, slowing the helicopter.

Probable cause

The pilot receiving instruction’s abrupt cyclic control input during the touch-down autorotation. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
10000
Visibility (sm)
10
Wind direction
220
Wind speed (kt)
7
Temperature (F)
64
Nearest airport
FRANKLIN FIELD
Distance from field
0.0
Airport elevation
23

Aircraft

RegistrationMakeModelDamageFAR part
N622MP ROBINSON HELICOPTER R22 SUBS 091

Sequence of events

#OccurrencePhase
1 Landing Miscellaneous/other Cruise
2 Landing Loss of control on ground defining Cruise

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Yaw control-Not attained/maintained cause
Aircraft-Aircraft systems-Flight control system-(general)-Incorrect use/operation cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Student/instructed pilot cause