N2762P accident

NTSB GAA18CA352 · 2018-06-17 · Orondo, WA

Docket — crew, injuries and powerplant

Summary

According to the pilot, during a cherry drying flight, the helicopter climbed slowly over a small hill and then struck power lines on the other side of the hill. The helicopter subsequently made a "medium-hard" impact with a grassy area near the orchard. The helicopter sustained substantial damage to the tailboom. The pilot reported that there were no mechanical malfunctions or failures with the helicopter that would have precluded normal operation.

Full narrative

According to the helicopter pilot, during a cherry drying flight, the helicopter climbed slowly over a small hill and struck powerline wires that were on the other side of the hill. The pilot landed the helicopter, but the landing was hard. The helicopter sustained substantial damage to the tailboom.

The pilot reported that there were no mechanical malfunctions or failures with the helicopter that would have precluded normal operation.

Probable cause

The pilot's failure to maintain clearance from power lines while maneuvering at low altitude. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
260
Wind speed (kt)
8
Temperature (F)
59
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N2762P — — SUBS 091

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying Low altitude operation/event defining Climb
2 Maneuvering-low-alt flying Collision with terr/obj (non-CFIT) Climb

Findings

Finding
Environmental issues-Physical environment-Object/animal/substance-Wire-Effect on operation cause
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause