N7040P Robinson R66 accident
NTSB GAA18CA366 · 2018-06-19 · Cordova, AK
Docket — crew, injuries and powerplant
Summary
The helicopter pilot reported that, after multiple attempts to find a suitable landing site on a mountain ridgetop, the tail rotor impacted brush during landing. The helicopter pivoted, the main rotor contacted a communications tower, and the helicopter then rotated 180° and rolled onto its left side. The helicopter sustained substantial damage to the windscreen and main rotor mast. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.
Full narrative
The helicopter pilot reported that, after multiple attempts to find a suitable landing site on a mountain ridgetop, the tail rotor impacted brush during landing. The helicopter pivoted, the main rotor contacted a communications tower, and the helicopter rotated 180° and rolled onto its left side.
The helicopter sustained substantial damage to the windscreen and main rotor mast.
The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.
Probable cause
The pilot’s selection of unsuitable terrain for landing, which resulted in impact with brush and a loss of helicopter control. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- BKN
- Ceiling (ft)
- 3200
- Visibility (sm)
- 10
- Wind direction
- 0
- Temperature (F)
- 57
- Distance from field
- 0.0
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N7040P | Robinson | R66 | SUBS | 135 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 1 | Landing Miscellaneous/other defining | Cruise |
| 2 | Landing Collision with terr/obj (non-CFIT) | Cruise |
| 3 | Landing Roll over | Cruise |