N9130T accident

NTSB GAA18CA373 · 2018-06-20 · Kent, WA · near S36

Docket — crew, injuries and powerplant

Summary

The pilot reported that, after touchdown, he applied "too much brake," and the tailwheel-equipped airplane came to rest in a nose-down position, the propeller struck the ground, and the airplane then came to rest vertically on its nose and right wingtip. The airplane sustained substantial damage to the right wing. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Full narrative

The pilot reported that, after touchdown, "too much brake was applied" and the tailwheel equipped airplane nosed down, struck the propeller, and came to rest vertically on its nose and right wing tip.

The airplane sustained substantial damage to the right wing.

The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot’s use of excessive braking during the landing roll, which resulted in the airplane coming to rest nose down. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Temperature (F)
84
Nearest airport
NORMAN GRIER FIELD
Distance from field
0.0
Airport elevation
472

Aircraft

RegistrationMakeModelDamageFAR part
N9130T — — SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Miscellaneous/other Cruise
2 Landing-landing roll Loss of control on ground Cruise
3 Landing-landing roll Nose over/nose down defining Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Landing gear brakes system-Incorrect use/operation cause
Personnel issues-Task performance-Use of equip/info-Use of equip/system-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Surface speed/braking-Incorrect use/operation cause