N39LR Bell 206 accident

NTSB GAA18CA424 · 2018-07-16 · New Castle, IN

Docket — crew, injuries and powerplant

Summary

According to the helicopter pilot, during an agricultural flight, he landed on the tender truck platform. The ground crewman connected a hose to fill the hopper, but he did not provide positive communication to the pilot regarding task completion. Consequently, "due to crew miscommunication," the pilot took off with the hose still connected to the helicopter. The tail rotor struck the hose, and the pilot lost tail rotor effectiveness. The helicopter entered an uncontrollable right spin, and the pilot lowered the collective. The helicopter descended, struck the ground, and then rolled over. The helicopter sustained substantial damage to the tailboom, tail rotor system, main rotor system, and the skids. The pilot reported that the accident could have been prevented by implementing a documented operating procedure to ensure positive communication between the ground crew and pilot. The pilot reported that there were no mechanical malfunctions or failures with the helicopter that would have precluded normal operation.

Full narrative

According to the helicopter pilot, during an agricultural flight he landed on the tender truck platform. The ground crewman connected a hose to fill the hopper, but he did not provide positive communication to the pilot regarding task completion. Consequently, "due to crew miscommunication" the pilot took off with the hose still connected to the helicopter. The tail rotor struck the hose and the pilot lost tail rotor authority. The helicopter entered an uncontrollable spin to the right, and the pilot lowered the collective. The helicopter descended and struck the ground, and then it rolled over.

Additionally, the pilot reported that the accident could have been prevented by implementing a documented operating procedure to ensure positive communication between the ground crew and pilot.

The helicopter sustained substantial damage the tailboom, tail rotor system, main rotor system and the skids.

The pilot reported that there were no mechanical malfunctions or failures with the helicopter that would have precluded normal operation.

Probable cause

The pilot's failure to ensure that the fill hose was disconnected from the helicopter before takeoff, which resulted in the fill hose striking the tail rotor and the subsequent loss of tail rotor effectiveness. Contributing to the accident was inadequate communication between the ground crewman and the pilot. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
700
Visibility (sm)
7
Wind direction
210
Wind speed (kt)
5
Temperature (F)
77
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N39LR Bell 206 SUBS 137

Sequence of events

#OccurrencePhase
1 Prior to flight Aircraft servicing event Standing
2 Takeoff Collision during takeoff/land defining Takeoff
3 Takeoff Loss of control in flight Takeoff
4 Uncontrolled descent Collision with terr/obj (non-CFIT) Descent
5 Post-impact Roll over Approach

Findings

Finding
Personnel issues-Action/decision-Action-Lack of action-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Prop/rotor parameters-Attain/maintain not possible cause
Organizational issues-Management-Communication (organizational)-Between individuals-Operator - F cause