N93039 Cessna A185 accident

NTSB GAA18CA501 · 2018-08-20 · McCall, ID · near KMYL

Docket — crew, injuries and powerplant

Summary

According to the pilot in the tailwheel-equipped airplane, during a wheel-landing, the airplane yawed left, and he applied right rudder to counter the yaw. The tail descended to the runway, and the left yaw increased. He countered the left yaw with a right brake and rudder application. He recalled that the right brake application was "completely ineffective" and that the airplane exited the left side of the runway. The airplane entered the rough gravel surface on the left side of the runway, and the pilot applied left rudder and left brake to intentionally ground loop the airplane. The right wing struck the ground, and the airplane came to a stop. The airplane sustained substantial damage to the right wing and aileron. Postaccident examination of the airplane's brake system by Federal Aviation Administration aviation safety inspectors revealed that the cotter pin and clevis that connects the right brake cylinder connecting rod to the inner right brake pedal connection point was detached, and it was not recovered.

Full narrative

According to the pilot in the tailwheel-equipped airplane, during a wheel-landing the airplane yawed left and he applied right rudder to counter the yaw. The tail descended to the runway and the left yaw increased. He countered the left yaw with a right brake application as well as the right rudder application. He recalled that the right brake application was "completely ineffective" and the airplane exited the left side of the runway. The airplane entered the rough gravel surface on the left side of the runway, and the pilot applied left rudder and left brake to intentionally ground-loop the airplane. The right wing struck the ground, and the airplane came to a stop.

The airplane sustained substantial damage to the right wing and aileron.

Post-accident examination of the airplane's brake system by Federal Aviation Administration Aviation Safety Inspectors revealed that the cotter pin and clevis that connects the right brake cylinder connecting rod to the inner right brake pedal connection point was detached and unrecovered.

The pilot reported that there were no mechanical malfunctions or failures with the airplane prior to landing that would have precluded normal operation.

Probable cause

The disconnection of the brake cylinder actuator rod, which resulted in the pilot’s inability to maintain directional control during the landing roll. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Wind direction
330
Wind speed (kt)
11
Temperature (F)
70
Nearest airport
McCall Municipal Airport
Distance from field
0.0
Airport elevation
5024

Aircraft

RegistrationMakeModelDamageFAR part
N93039 Cessna A185 SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Loss of control on ground defining Cruise
2 Landing-landing roll Attempted remediation/recovery Cruise
3 Landing-landing roll Runway excursion Cruise
4 Landing-landing roll Collision with terr/obj (non-CFIT) Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Landing gear brakes system-Failure cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Attain/maintain not possible cause