N8052G Bell 206 accident

NTSB GAA18CA512 · 2018-08-18 · Battle Mountain, NV

Docket — crew, injuries and powerplant

Summary

The helicopter pilot reported that, while climbing out of a canyon at 30 knots indicated airspeed, about 50 ft above ground level, he felt a "hard vibration" in the cyclic and collective controls. He then saw that the airspeed gauge was reading 0 knots and felt the helicopter being pushed down. The torque indicator rose to 120% without any cyclic or collective control input. He applied right cyclic, lowered the collective, applied right pedal to counter the torque, and turned the helicopter downslope into the wind. He applied forward cyclic to better match the downslope of the terrain and raised the collective, but the skids impacted the ground, followed by the main rotor blades. The helicopter rotated 180º to the right before coming to rest downhill on its right side. Shortly after, a postimpact fire ensued, which destroyed the helicopter. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation. The pilot reported that the winds were gusting to 30 knots in the canyon and "changing direction every minute or so."

Full narrative

The helicopter pilot reported that while climbing out of a canyon at 30 knots indicated airspeed, about 50 ft above the ground, he felt a "hard vibration" in the cyclic and collective controls. He then saw that the airspeed gauge was reading zero knots and he felt the helicopter was being pushed down. The torque indicator rose to 120% without any cyclic and collective control input. He applied right cyclic, lowered the collective, applied right pedal to counter the torque, and turned the helicopter downslope and into the wind. He applied forward cyclic to better match the downslope of the terrain and raised collective, but the helicopter impacted terrain. The skids impacted the ground first followed by the main rotor blades. The helicopter rotated 180º to the right before coming to rest downhill, on its right side. Shortly after, a post impact fire ensued.

The helicopter was destroyed during the postimpact fire.

The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

The pilot reported that the winds were gusting up to 30 knots in the canyon, "changing direction every minute or so."

Probable cause

The pilot's failure to maintain the proper altitude and airspeed while flying in a canyon in gusting wind conditions. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
7
Wind direction
10
Wind speed (kt)
8
Temperature (F)
90
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N8052G Bell 206 DEST 091

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying Miscellaneous/other Climb
2 Maneuvering-low-alt flying Loss of lift Climb
3 Maneuvering-low-alt flying Loss of control in flight defining Climb
4 Maneuvering-low-alt flying Low altitude operation/event Climb
5 Maneuvering-low-alt flying Collision with terr/obj (non-CFIT) Climb
6 Post-impact Fire/smoke (post-impact) Approach

Findings

Finding
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Altitude-Not attained/maintained cause
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Airspeed-Not attained/maintained cause
Environmental issues-Conditions/weather/phenomena-Wind-Gusts-Effect on operation cause
Environmental issues-Physical environment-Terrain-Mountainous/hilly terrain-Effect on operation cause