N441GR Cessna U206 accident

NTSB ANC18LA067 · 2018-08-18 · Pedro Bay, AK

Docket — crew, injuries and powerplant

Summary

According to the pilot, before landing on the tidal beach, he conducted two passes over the landing area to check for debris and determine wind direction. He stated that, after touchdown on the beach, the airplane felt like it had a flat tire and subsequently veered to the right. The airplane came to rest in a left-wing-low attitude on a tidal mudflat and sustained substantial damage to the left wing, left horizontal stabilizer, and left elevator. The pilot examined the airplane and noted that both main landing gear legs had separated just above the main axle attach point. A laboratory examination revealed that both main landing gear legs failed due to fatigue cracking.

Full narrative

On August 18, 2018, about 1000 Alaska daylight time, a Cessna U206F airplane, N441GR, sustained substantial damage while landing at a remote unimproved tidal beach about 36 miles east of Pedro Bay, Alaska. The airplane was registered to AK Air Leasing, LLC and operated by K Bay Air, LLC as a visual flight rules (VFR) on-demand commercial flight under the provisions of 14 Code of Federal Regulations Part 135 when the accident occurred. The commercial pilot and five passengers were not injured. Visual meteorological conditions prevailed, and company flight following procedures were in effect. The flight departed Homer, Alaska, about 0900.

According to the pilot, before landing on the tidal beach, he conducted two passes over the landing area to check for debris and determine wind direction. After a stable approach, the left main and uphill tire touched down first followed by the right main tire. The pilot stated that after touchdown, it "felt like" the airplane had a flat tire and it subsequently veered to the right and came to rest in a left wing low attitude on a tidal mudflat. The airplane sustained substantial damage to the left wing, left horizontal stabilizer and left elevator.

An initial examination of the airplane, by the pilot, revealed that both main landing gear legs separated just above the main axle attach point.

An examination by the National Transportation Safety Board (NTSB) Materials Laboratory revealed that both main landing gear legs exhibited chevron marks leading to a thumbnail region consistent with fatigue cracking.

The NTSB Materials Laboratory examination report is in the public docket for this accident.

Probable cause

The fatigue fracture of both main landing gear legs during the landing roll, which resulted in the collapse and separation of both main landing gear legs. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
6500
Visibility (sm)
10
Wind direction
0
Temperature (F)
54
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N441GR Cessna U206 SUBS 135

Sequence of events

#OccurrencePhase
1 Landing-landing roll Part(s) separation from AC defining Cruise

Findings

Finding
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Failure cause
Aircraft-Aircraft systems-Landing gear system-Main landing gear-Fatigue/wear/corrosion cause