N9RW De Havilland DHC 2 MK. I(L20A) accident

NTSB GAA18CA581 · 2018-09-24 · Kukaklek Lake, AK

Docket — crew, injuries and powerplant

Summary

The pilot of the float-equipped airplane reported that, during landing on a river to pick up passengers, he observed that the river was low and that sand bars were visible. During takeoff, the left float contacted a sand bar in shallow water, and the airplane impacted the river bank. The airplane sustained substantial damage to the left wing. The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Full narrative

The pilot of the float-equipped airplane reported that, during landing on a river to pick up passengers, he observed that the river was low, and sand bars were visible. During takeoff, the left float contacted a sand bar in shallow water and the airplane impacted the river bank.

The airplane sustained substantial damage to the left wing.

The pilot reported that there were no preaccident mechanical failures or malfunctions with the airplane that would have precluded normal operation.

Probable cause

The pilot’s failure to see and avoid a sand bar during a water takeoff, which resulted in the airplane impacting a river bank. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
12000
Visibility (sm)
10
Wind direction
170
Wind speed (kt)
4
Temperature (F)
48
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N9RW De Havilland DHC 2 MK. I(L20A) SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff Dragged wing/rotor/float/other defining Takeoff
2 Takeoff Collision with terr/obj (non-CFIT) Takeoff

Findings

Finding
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause
Environmental issues-Physical environment-Runway/land/takeoff/taxi surface-(general)-Effect on operation factor