N350DL Aerospatiale AS350 accident

NTSB GAA19CA238 · 2019-04-30 · Sula, MT

Docket — crew, injuries and powerplant

Summary

The helicopter pilot reported that, after an agricultural application flight, he set the bucket down in a predetermined operations zone near a semi-truck loading hopper to be refilled. He added that another truck arrived to top off the semi-truck hopper, which emitted fertilizer dust and led to the pilot being concerned that it would deteriorate visibility. He advised the ground crew that he was going to temporarily move out of the operations zone. The pilot reported that he set the bucket in the new temporary operations zone. As the skid steer approached, he eased the helicopter backward to keep the other ground equipment in his view. The pilot heard a "bang," disconnected the helicopter from the long-line, and then landed the helicopter without further incident. Postaccident examination revealed that the auger from the semi-truck hopper was fully extended behind the helicopter and that a tail rotor blade had sustained substantial damage. The pilot reported that he might have backed the helicopter into the extended auger. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.

Full narrative

The helicopter pilot reported that, after an aerial application flight, he set the bucket down in a pre-determined operations zone near a semi-truck loading hopper to be refilled. He added that another truck arrived to top off the semi-truck hopper, which emitted fertilizer dust that caused the pilot concerns for his deteriorating visibility. He advised the ground crew that he was going to move out of the operations zone temporarily.

The pilot reported that he set the bucket in the new temporary operations zone. As the skid steer approached, he eased the helicopter backward to keep the other ground equipment in his view. The pilot heard a "bang", disconnected from his long-line, and landed the helicopter without further incident.

Postaccident examination revealed that the auger from the semi-truck hopper was fully extended behind the helicopter and tail rotor blade sustained substantial damage. The pilot suspected that he backed the helicopter into the extended auger.

The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.

Probable cause

The pilot's failure to maintain adequate clearance from ground equipment, which resulted in a tail rotor blade impact. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
10000
Visibility (sm)
10
Wind direction
200
Wind speed (kt)
8
Temperature (F)
36
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N350DL Aerospatiale AS350 SUBS 137

Sequence of events

#OccurrencePhase
1 Maneuvering-hover Low altitude operation/event defining Climb
2 Maneuvering-hover Collision with terr/obj (non-CFIT) Climb

Findings

Finding
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause
Environmental issues-Physical environment-Object/animal/substance-Ground equipment-Effect on operation cause