N49368 Taylorcraft BC12 accident

NTSB GAA19CA366 · 2019-06-21 · Yerington, NV · near O43

Docket — crew, injuries and powerplant

Summary

The pilot reported that, before attempting to take off, he tied a rope to the airplane's tail and then hand propped the airplane. The engine started, and "the rope snapped." Subsequently, the unmanned airplane started moving and then impacted a fence. The airplane sustained substantial damage to the right aileron. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Full narrative

The pilot in tailwheel-equipped airplane reported that, he tied a rope to the tail of his airplane and hand-propped the airplane. The engine started and "the rope snapped." Subsequently, the unmanned airplane collided with a chain-link fence.

The airplane sustained substantial damage to the right aileron.

The pilot reported that there were no mechanical malfunctions or failures with the airplane that would have precluded normal operation.

Probable cause

The pilot's failure to properly secure the airplane before hand propping it, which resulted in the unmanned airplane moving and colliding with a fence. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
0
Wind speed (kt)
10
Temperature (F)
81
Nearest airport
Yerington Muni
Distance from field
0.0
Airport elevation
4381

Aircraft

RegistrationMakeModelDamageFAR part
N49368 Taylorcraft BC12 SUBS 091

Sequence of events

#OccurrencePhase
1 Standing-engine(s) start-up Loss of control on ground defining Standing
2 Standing-engine(s) start-up Ground collision Standing

Findings

Finding
Personnel issues-Action/decision-Action-Incorrect action performance-Pilot cause
Environmental issues-Physical environment-Object/animal/substance-Fence/fence post-Effect on operation cause