N805D Beech HAWKER 900XP accident

NTSB ERA20CA073 · 2020-01-03 · San Juan, PR · near SIG

Docket — crew, injuries and powerplant

Summary

As the pilot and copilot of the business jet were conducting an instrument approach to the runway and as the airplane was about to touch down, the pilot reduced the engine power. The airplane then descended and landed hard on a grassy area short of the runway threshold. The fuselage sustained substantial damage. The pilot reported that there were no preaccident mechanical malfunctions or failures with the airplane what would have precluded normal operation.

Full narrative

At the conclusion of an uneventful instrument flight rules flight, the flight crew of the business jet conducted an instrument approach to the runway. As the airplane was about to touch down, the pilot flying reduced engine power, the airplane descended and landed "hard" on a grassy area short of the runway threshold. The fuselage was substantially damaged during the landing. The pilot reported that there were no mechanical malfunctions or failures of the airplane what would have precluded normal operation.

Probable cause

The pilot's failure to maintain a proper descent rate during landing, which resulted in a hard landing short of the runway. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Instrument Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
2900
Visibility (sm)
2
Wind direction
90
Wind speed (kt)
6
Nearest airport
Fernando Luis Ribas Dominicci
Distance from field
6.0
Airport elevation
9

Aircraft

RegistrationMakeModelDamageFAR part
N805D BEECH HAWKER 900XP SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-flare/touchdown Landing area undershoot Cruise
2 Landing-flare/touchdown Hard landing defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Descent rate-Not attained/maintained cause