N130JS Enstrom 480 accident

NTSB WPR20CA171 · 2020-06-04 · Murphy, ID

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that during the aerial application flight, while maneuvering at low altitude, he came upon some trees and increased altitude to climbed above the treetops. He did not see that there were power lines behind the trees and did not have enough time to avoid colliding with two of the lines. The pilot was unable to maintain control of the helicopter descended in a slow spin to ground impact. The helicopter sustained substantial damage to the fuselage and tail boom. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.

Probable cause

The pilot's failure to maintain clearance from a power line while maneuvering during an aerial application flight. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
290
Wind speed (kt)
5
Temperature (F)
73
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N130JS Enstrom 480 SUBS 137

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying Low altitude operation/event defining Climb
2 Maneuvering-low-alt flying Collision with terr/obj (non-CFIT) Climb

Findings

Finding
Environmental issues-Physical environment-Object/animal/substance-Wire-Effect on operation cause
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause