N153CC Cub Crafters CCK-1865 accident

NTSB ANC20CA062 · 2020-06-28 · Juneau, AK

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that he was landing on a tidal beach in his tailwheel-equipped airplane. After touchdown, and during the landing rollout, the airplane veered to the right and the left main landing gear collapsed. The airplane sustained substantial damage to the left wing and left elevator. The pilot reported no preaccident mechanical failures or malfunctions that would have precluded normal operations. In the recommendation section of the NTSB Accident/Incident Reporting Form 6120.1, the pilot stated that the accident may have been prevented if he had been more proficient in tailwheel-equipped airplanes.

Probable cause

The pilot's failure to maintain directional control during the landing rollout, which resulted in a ground loop. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
OVC
Ceiling (ft)
17000
Visibility (sm)
10
Wind direction
240
Wind speed (kt)
11
Temperature (F)
63
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N153CC Cub Crafters CCK-1865 SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Loss of control on ground defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause