N570WH Robinson R44 accident

NTSB CEN20CA300 · 2020-07-20 · Dickeyville, WI

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that while performing an aerial application flight at low altitude, the helicopter impacted wires between two poles. He stated the wires were higher than he expected due to the change in terrain contours relative to the poles, and he did not see the wires until just before impact. He then performed a precautionary landing to an adjacent waterway. The helicopter sustained substantial damage to the main rotor blades. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation.

Probable cause

The pilot did not maintain clearance from wires during an aerial application flight. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
310
Wind speed (kt)
3
Temperature (F)
77
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N570WH Robinson R44 SUBS 137

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying Low altitude operation/event defining Climb
2 Maneuvering-low-alt flying Collision with terr/obj (non-CFIT) Climb

Findings

Finding
Personnel issues-Psychological-Attention/monitoring-Monitoring environment-Pilot cause
Environmental issues-Physical environment-Object/animal/substance-Wire-Effect on operation cause