N104SU Hughes 369 accident

NTSB CEN20CA334 · 2020-08-05 · Delia, KS

Docket — crew, injuries and powerplant

Factual narrative

While conducting an aerial tree-trimming flight with an external load aerial saw, the pilot heard a loud “thump” and felt a collision. A heavy vibration was felt, and the pilot landed in a nearby cornfield without further incident. Upon landing substantial damage was found to the main rotor blades with embedded pieces of tree bark and vegetation found in the blades. The pilot reported that there were no mechanical malfunctions that contributed to the accident. The aerial saw was suspended about 120 ft below the helicopter. The operator noted that this distance is normally adequate to prevent foreign object damage (FOD) to the main rotor blades.

Probable cause

Foreign object damage sustained to the main rotor blades due to aerial tree trimming. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
120
Wind speed (kt)
8
Temperature (F)
79
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N104SU HUGHES 369 SUBS 133

Sequence of events

#OccurrencePhase
1 Maneuvering-low-alt flying Miscellaneous/other defining Climb

Findings

Finding
Aircraft-Aircraft propeller/rotor-Main rotor system-Main rotor blade system-Damaged/degraded cause
Environmental issues-Physical environment-Object/animal/substance-Debris/dirt/foreign object-Effect on equipment cause