N182KT Cessna 182 accident

NTSB ANC20LA098 · 2020-09-21 · King Salmon, AK · near PAKN

Docket — crew, injuries and powerplant

Summary

The pilot reported that, after a normal touchdown in crosswind conditions, the left main landing gear (MLG) began to shake and rattle. The shaking continued and became more severe as the airplane continued its landing roll, and the airplane subsequently began to veer to the left and exited the runway. As the airplane came to rest, the MLG spring separated from the fuselage, resulting in substantial damage to the left horizontal stabilizer and elevator. A postaccident examination of the left MLG spring attach hardware fractured surfaces revealed that the left MLG U-bolt failed due to fatigue cracking and the MLG support bolt fractured within the shank due to shear loads.

Full narrative

On September 21, 2020, about 1405 Alaska daylight time, a Cessna 182C airplane, N182KT, sustained substantial damage when it was involved in an accident near King Salmon, Alaska. The private pilot was not injured. The airplane was operated as a Title 14 Code of Federal Regulations Part 91 personal flight.

According to the pilot, after a normal touchdown in crosswind conditions, the left main landing gear (MLG) began to shake and rattle. The shaking continued and became more severe as the airplane continued the landing roll, and the airplane subsequently began to veer to the left and exited the runway. As the airplane came to rest, the left MLG spring separated from the fuselage, resulting in substantial damage to the left horizontal stabilizer and elevator.

An initial examination of the airplane by the pilot revealed that the left MLG spring U-bolt and MLG support bolt fractured, allowing the left MLG spring to separate from the fuselage.

A visual and microscopic examination of the left MLG spring attach hardware revealed a fatigue crack in the U-bolt that emanated in the first thread root of the U-bolt and propagated substantially through the thickness of the thread until it reached a critical size and ultimately failed due to overstress. Examination of the MLG bolt revealed that the bolt fractured within the shank due to shear loads.

Probable cause

The fatigue fracture failure of the left main landing gear U-bolt during landing, which resulted in the collapse and separation of the left main landing gear spring. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
80
Wind speed (kt)
15
Temperature (F)
57
Nearest airport
King Salmon
Distance from field
0.0
Airport elevation
73

Aircraft

RegistrationMakeModelDamageFAR part
N182KT Cessna 182 SUBS 091

Sequence of events

#OccurrencePhase
1 Landing-landing roll Sys/Comp malf/fail (non-power) defining Cruise
2 Landing-landing roll Loss of control on ground Cruise
3 Landing-landing roll Part(s) separation from AC Cruise

Findings

Finding
Aircraft-Aircraft structures-Fuselage-Gear attach fittings (on fus)-Fatigue/wear/corrosion cause