N712CA accident

NTSB ERA21LA043 · 2020-11-14 · Hammonton, NJ · near N81

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported he was departing from a dolly connected to a Kubota. During the initial collective input, he believed he had a stuck tail rotor pedal but continued the takeoff attempt because he “wasn’t afraid of a stuck pedal.” As the helicopter started to slide left off the dolly, he increased collective, the helicopter spun to the left and impacted the Kubota, resulting in substantial damage to the tail rotor and tail boom. A post-accident examination was unable to determine a definitive mechanical, hydraulic or electrical malfunction or anomaly that would have precluded normal operation.

Probable cause

The pilot's decision to continue the takeoff with a perceived mechanical deficiency. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
290
Wind speed (kt)
8
Temperature (F)
54
Nearest airport
HAMMONTON MUNI
Distance from field
0.0
Airport elevation
64

Aircraft

RegistrationMakeModelDamageFAR part
N712CA — — SUBS 091

Sequence of events

#OccurrencePhase
2 Takeoff Collision during takeoff/land defining Takeoff

Findings

Finding
Personnel issues-Action/decision-Info processing/decision-Decision making/judgment-Pilot cause