N53587 accident

NTSB ERA21LA057 · 2020-11-27 · Sanford, NC · near TTA

Docket — crew, injuries and powerplant

Factual narrative

The student pilot reported that prior to takeoff, he was aware of a left crosswind of about 5 knots and compensated by applying extra left aileron. During the takeoff roll about 45 to 50 knots, the airplane started to veer to the left. The pilot stated that the airplane, “felt like it had lifted off the ground” in a gradual left roll and he was unable to correct with right aileron or sufficient rudder. Once the airplane departed the runway, he reduced the power and applied the brakes, but the airplane skidded down an embankment and collided with a hill. The impact separated the engine from the mounts and the nose landing gear was sheared off which caused substantial damage to the fuselage. The pilot reported that he likely had more left aileron than was necessary for the crosswind at the beginning of the takeoff roll, and he did not reduce the control application as the airspeed increased. The pilot reported that there were no mechanical malfunctions or failures of the airplane that would have precluded normal operation.

Probable cause

The pilot's loss of directional control during takeoff in crosswind conditions, which resulted in a runway excursion and impact with terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
BKN
Ceiling (ft)
2500
Visibility (sm)
10
Wind direction
350
Wind speed (kt)
5
Temperature (F)
66
Nearest airport
Raleigh Executive Jetport at S
Distance from field
0.0
Airport elevation
246

Aircraft

RegistrationMakeModelDamageFAR part
N53587 — — SUBS 091

Sequence of events

#OccurrencePhase
1 Takeoff Loss of control on ground defining Takeoff

Findings

Finding
Environmental issues-Conditions/weather/phenomena-Wind-Crosswind-Decision related to condition cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause