N728VM Mooney International Corp M20TN accident
NTSB ERA21LA097 · 2020-12-30 · Holly Ridge, NC · near N21
Docket — crew, injuries and powerplant
Factual narrative
The pilot reported that during the first landing attempt at the destination airport the airplane was too fast, so he performed a go-around. During his second attempt, he descended and touched down on the runway, however, he overshot his intended landing spot. He added that he did not believe a safe go-around could be performed after the touchdown, so he decided to continue the landing roll and applied max braking, however, the airplane overran the end of the runway and struck mower equipment located to the right of the runway. The left wing sustained substantial damage. The pilot reported that there were no mechanical malfunctions or failures with the airplane.
Probable cause
The pilot’s failure to perform a go-around during an unstable approach to land which resulted in a landing area overshoot and a subsequent runway excursion. The National Transportation Safety Board determined the probable cause of this accident.
Circumstances
- Event type
- Accident
- Highest injury
- None
- Weather conditions
- Visual Meteorological Cond
- Light condition
- Day
- Sky condition
- BKN
- Ceiling (ft)
- 8000
- Visibility (sm)
- 10
- Wind direction
- 140
- Wind speed (kt)
- 3
- Temperature (F)
- 57
- Nearest airport
- HOLLY RIDGE/TOPSAIL ISLAND AIR
- Distance from field
- 0.0
- Airport elevation
- 48
Aircraft
| Registration | Make | Model | Damage | FAR part |
|---|---|---|---|---|
| N728VM | MOONEY INTERNATIONAL CORP | M20TN | SUBS | 091 |
Sequence of events
| # | Occurrence | Phase |
|---|---|---|
| 2 | Landing Runway excursion defining | Cruise |