N352LL Agustawestland Philadelphia Co AW119MKII accident

NTSB CEN21LA128 · 2021-02-13 · Alexandria, MN · near AXN

Docket — crew, injuries and powerplant

Factual narrative

The airline transport pilot of the commercial air medical flight reported that during a climbing left turn on departure, he heard a “thud.” He confirmed with the crew they had not dropped anything, and they affirmed they had not. The pilot believed the helicopter had hit something and elected to return to the departure airport. The pilot scanned the air to find what they could have impacted but did not see anything and then assumed a cowling had become unlatched due to the cold and vibration. He landed and left the helicopter running while the crew looked over the helicopter. At this time, the pilot was notified the trip was cancelled so he shut down, refueled, and moved the helicopter into the hangar. Once in the hangar, the pilot noticed the leading edge of the main rotor blade was a dented with a hole through the blade just aft of the dent. What caused the substantial damage to the main rotor blade was not determined. The pilot reported there were no preaccident mechanical malfunctions or failures with the helicopter that would have precluded normal operation.

Probable cause

The helicopter’s impact with an object on departure that could not be determined. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
360
Wind speed (kt)
3
Temperature (F)
-9
Nearest airport
CHANDLER FLD
Distance from field
1.0
Airport elevation
1425

Aircraft

RegistrationMakeModelDamageFAR part
N352LL AGUSTAWESTLAND PHILADELPHIA CO AW119MKII SUBS 135

Sequence of events

#OccurrencePhase
1 Enroute-climb to cruise Collision with terr/obj (non-CFIT) defining Climb

Findings

Finding
Environmental issues-Physical environment-Object/animal/substance-(general)-Effect on equipment factor