N4505B Cameron Balloons Z-90 accident

NTSB CEN21LA164 · 2021-03-20 · Celina, TX

Docket — crew, injuries and powerplant

Factual narrative

The commercial pilot reported that while setting up to land in a field following a 1.3 hour flight to reestablish his solo currency, he noted on final approach that the venting system, used to release air from the envelope for descents, landings, and deflation, had malfunctioned. The pilot attempted to correct the problem while continuing to land. Immediately on landing, the balloon began to spinnaker and drag along the ground. The balloon finally came to a stop beneath powerlines adjacent to a road. The balloon sustained substantial damage to several lower panels of the envelope between the skirt and the equator. The pilot reported that not all the Velcro tabs to the parachute top of the venting system may have properly released prior to launch, which he believed was responsible for the outcome he experienced. The pilot also reported the wind was higher at the time of the accident than it was at the time of the launch, which was 5 knots.

Probable cause

The malfunction of the balloon’s envelope venting system during landing in high wind, which resulted in the balloon being dragged along the ground, substantially damaging the envelope. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
120
Wind speed (kt)
5
Temperature (F)
48
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N4505B CAMERON BALLOONS Z-90 SUBS 091

Sequence of events

#OccurrencePhase
2 Approach Sys/Comp malf/fail (non-power) defining Cruise

Findings

Finding
Aircraft-Aircraft systems-(general)-(general)-Malfunction cause
Environmental issues-Conditions/weather/phenomena-Wind-Variable wind-Contributed to outcome cause