N1045C accident

NTSB CEN21LA169 · 2021-03-27 · Pottsboro, TX

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported that while in a hover and preparing to land in a field, wind caught the turbine-powered helicopter causing it to drift into a fence. The helicopter’s skid caught on the fence and the helicopter flipped over onto its right side, impacting terrain, and coming to rest on a driveway. The helicopter sustained substantial damage to the tailboom, fuselage, and main rotor system. The pilot reported that there were no preaccident mechanical failures or malfunctions with the helicopter that would have precluded normal operation. About 30 minutes before the accident, an automated weather reporting station located about 6 miles south of the accident side, reported wind from 220o at 6 knots.

Probable cause

The pilot failure to maintain directional control of the helicopter when it encountered an unanticipated wind allowing it to drift into a fence and subsequently roll over and impact terrain. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
Minor
Weather conditions
Visual Meteorological Cond
Light condition
Day
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
220
Wind speed (kt)
6
Temperature (F)
79
Distance from field
0.0

Aircraft

RegistrationMakeModelDamageFAR part
N1045C — — SUBS 091

Sequence of events

#OccurrencePhase
2 Landing Loss of control in flight defining Cruise
3 Landing Collision during takeoff/land Cruise
4 Landing Roll over Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause
Environmental issues-Conditions/weather/phenomena-Wind-(general)-Effect on operation cause