N416RP Piper PA28 accident

NTSB CEN21LA228 · 2021-05-17 · Pinecreek, MN · near 48Y

Docket — crew, injuries and powerplant

Factual narrative

The pilot reported he was performing a touch-and-go landing with a gusting crosswind when during the landing flare, the wind gust increased, and the left wing raised up. The pilot added more crosswind control inputs, but overcorrected. The airplane yawed left and the pilot lost control of the airplane. The airplane departed the side of the runway and impacted the terrain coming to rest in the grass. The airplane sustained substantial damage to the left wing. The pilot reported that there were no preaccident mechanical failures or malfunctions that would have precluded normal operation. At the time of the accident, the pilot was landing the airplane on runway 33 with wind from 270o at 9 knots with gusts to 19 knots. The pilot reported that the accident could have been prevented if he would have performed a go-around.

Probable cause

The pilot’s failure to maintain control of the airplane in gusting crosswind conditions. The National Transportation Safety Board determined the probable cause of this accident.

Circumstances

Event type
Accident
Highest injury
None
Weather conditions
Visual Meteorological Cond
Light condition
Day
Sky condition
NONE
Ceiling (ft)
0
Visibility (sm)
10
Wind direction
270
Wind speed (kt)
9
Temperature (F)
77
Nearest airport
PINEY PINECREEK BORDER
Distance from field
0.0
Airport elevation
1082

Aircraft

RegistrationMakeModelDamageFAR part
N416RP PIPER PA28 SUBS 091

Sequence of events

#OccurrencePhase
2 Landing Attempted remediation/recovery Cruise
3 Landing-aborted after touchdown Runway excursion Cruise
4 Landing Other weather encounter Cruise
5 Landing Loss of control in flight defining Cruise

Findings

Finding
Personnel issues-Task performance-Use of equip/info-Aircraft control-Pilot cause
Environmental issues-Conditions/weather/phenomena-Wind-Gusts-Ability to respond/compensate cause
Aircraft-Aircraft oper/perf/capability-Performance/control parameters-Directional control-Not attained/maintained cause